标题: 关于WCML内CLASS86的问题 [打印本页] 作者: RW王 时间: 2012-1-9 10:44 标题: 关于WCML内CLASS86的问题 我每次启动CLASS86，打到100%的节流阀，制动归零。速度就只有20多，怎样让速度提高点？ 作者: 1024blue 时间: 2012-1-9 12:04
Ammeter Display:
This displays the amount of resistance from the transformer in
relation to the voltage being applied. When tapping up or down
you must ensure that the Ammeter needles do not enter the red
area for more than a few seconds. Let the needles settle and
return to the green area being tapping up or down to the next
notch. If the Ammeter is in the red area for too long, the system
will overload and trip out. If this occurs, power will be lost, the
Ammeter will return to 0 and the Fault light will illuminate. 作者: 1024blue 时间: 2012-1-9 12:13
以上这段内容摘自86的《手册》。
大致意思是不要让电流计的指针（图中标记为17的地方）进入红色区域超过几秒钟。也就是不要施加太多的牵引。尽量使指针保持在绿色区域内。如果指针进入红色区域的时间过长，系统会因为过载而导致失去动力。指针会回到零位并且错误指示灯（19）会亮起。
[attach]24248[/attach]
